Axis Diy Cnc

DIY CNC Kit 4 Axis TB6600HG Stepper Motor Driver 2.5Nm Nema23 Display & Handle

DIY CNC Kit 4 Axis TB6600HG Stepper Motor Driver 2.5Nm Nema23 Display & Handle

DIY CNC Kit 4 Axis TB6600HG Stepper Motor Driver 2.5Nm Nema23 Display & Handle    DIY CNC Kit 4 Axis TB6600HG Stepper Motor Driver 2.5Nm Nema23 Display & Handle
DIY CNC Kit 4 Axis TB6600HG Stepper Motor Driver 2.5Nm Nema23 Display & Handle. DIY CNC Kit 4 Axis : The Latest 3rd Generation 5 Axis Breakout Board Set (BCD-S) +4 x Nema23 2.5Nm/354 Oz-in 57BYGH112-401A Stepper Motors +2 x 360W 36V10A Switching Power Supply +4 x TB6600HG Microstep Drivers. The latest 3rd generation breakout board has been upgraded to the intelligent, professional and industrial-level interface board set by re-designing the PCB board, embedding intelligent memory chip (professional version) and upgrading the external manual control tools (control pad and display panel). The re-designing the PCB board will make the breakout board control the microstep drivers more smoothly with lower noise. Actually, the 3rd generation breakout board set has two types of versions, one is the. Compare to the standard version, the professional version mainly has two more functions than the standard version, one is the. ", and another is the "manual programing function. Except these two functions, these two types of versions have no other differences. With the embedded intelligent memory chip, the professional version of this 3rd generation 5 Axis breakout board can easily record MAXIMUM 4 Axis' (X, Y, Z, A Axis) G-code running on the CNC software.

Of the computer, and then rerun the recorded G-code to make the stepper motor work without the computer any more. The TB1H is a high performance microstepping driver based on the latest original TOSHIBA high-efficiency TB6600HG IC. The TB6600HG adopts single-chip PWM bipolar sinusoidal chopper to ensure the low vibration and high efficiency. Moreover, the brand new design with BiCD0.13 (45V) process technology on the chipset also ensures maximum 5.0A output current and 45V output withstand voltage.

Consequently, as long as the current range of the stepper motor is within. 2 Phase or 4 Phase of Nema17, Nema23, Nema24 and Small-sized Nema34 stepper motors. Will work perfectly with this new-type TB6600HG Stepper Driver. In short, the qualities and functions of the new 3rd generation advanced 5 axis breakout board are revolutionized from the previous version.

With this CNC Kit, you will get more benefits from the Kit on CNC work. Please purchuse this kit with confidence.

This 3G 5 Axis breakout board is Standard Version (BCD-S), if you need the professional version 3G 5Axis breakout board or 1G 5Axis breakout board, please feel free to contact with us. 3G 5 Axis Breakout Board. To manually control the stepper motor, both of the standard and professional drivers have been equipped with the display panel and control pad.

Automatically identify both of the computer and control pad, functions of the computer and control pad can be switched intelligently for each other without any interference. Real-time trail the running path of G-Code. On the computer or input by the control pad, and then completely and synchronously display the changing of MAXIMUM FOUR axis'X, Y, Z A axis etc. Values on its screen, it is.

With the values' changing on the FOUR coordinates of Mach3. On X, Y, Z Axis via the control pad, without the support of the computer.

Both of the standard version and professional version are compatible with the Mach2, Mach3(Default Software). Besides, the professional version also can automatically trail the path running path of G-Code from the CNC software e. Of the computer and record the G-code into the memory chip; Easy to repeatedly run the G-code to control the stepper motors without computer. The professional version also supports manual programming via the control pad, as long as input the required values on one axis and record them in and so on.

Two ways to get power, 5V DC power supply or USB port to get power from PC directly. Compatible with all the 2 phase, 3 phase and 4 phase microstep drivers in the market. Automatic circuit protections function when the wirings between the breakout board and microstep drivers are incorrect. Available to control the spindle motor, air pump, water pump, etc. 5-axis work LED display, visually display the working condition of the stepper driver controller.

5 Types of input control in manual control interface, to set. TB6600HG Stepper Driver Board Controller. Supply voltage up to 45V DC. Output current up to 5.0A.

Suitable for 2-phase and 4-phase motors. High speed optoelectronic isolation signal input. Single-chip PWM bipolar sinusoidal chopper ensures low vibration and high efficiency. 1, 2, 4 (New Mode), 8, 16 adjustable microstep control, motors run more precisely and smoothly.

Equipped with the 3rd generation of breakout board, display panel and control pad to control the motor manually. Cooling Aluminium Box Design for Cooling, and protect the driver board from being damaged by dirt, dust or other liquids. Overload, overcurrent, overheat, overvoltage and undervoltage protection to avoid damaging your computer and devices. Suitable for any small-and-medium automatic equipment with CNC controller, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines, and pick-place devices. Suitable for a wide range of stepping motors, from NEMA size 17 to 34. For advising, such as brand, architechture mould, badge, nameplate, display boards, doorplate, furniture decoration, etc. For processing various pattern mould. (3G 5 Axis Breakout Board). Electrical Specifications of Breakout board.

5V DC via power adapter or directly get power from PC via USB port. Pulse + Direction + Enable Signal Control. 2 Phase, 3 Phase, 4 Phase Microstep Driver M542/M542H/MA860H/3MA2290 etc. 170g (Breakout Board + Display Panel).

Operationg Environment & Other Specifications of Breakout Board. Natural Cooling or Fan Forced cooling. Avoid dust, oil fog, corrosive gas.

0 °C 50°C (32°F 122°F). 20 °C 65°C (-4°F 149°F). 275g (Breakout Board + Control Pad + Display Panel). Electrical Specifications Of TB6600HG Stepper Driver.

0.2A 5.0A (Peak). Pulse + Direction + Enable Signal Control (Single-Chip PWM Bipolar Sine Chopper). Nema17, Nema23, Nema24, Small-sized Nema34 (Rated current: 0.2A-5.0A). Operationg Environment & Other Specifications Of TB6600HG Stepper Driver. Single Shaft (Diameter:8mm; Length:21mm). 4 x 1 Axis TB6600HG Microstep Driver Board (TB1H). 1 x 3G 5 Axis Breakout Board (Standard Version). 1 x Control Pad (Standard Version). 1 x Display Panel (Build-in Breakout Board). 4 x 57BYGH112-401A Stepper Motors. 2 x 36V10A Power Supply. 1 x DB25 LPT Parallel Cable. 1 x USB Power Cable. (May depart from other stock location). Require that the item should be delivered within a certain time. It is not guaranteed that parcel should arrive within the time stated above. However, 95%+ parcels will be delivered within the reference time. We will help you to track them. If you receive a not-as-described e. We will arrange a replacement as soon as the case is confirmed.

All qualified return/replacement must be guided by us. We may not accept your return without communication in advance.

By placing an order, you acknowledge that you have accepted the terms and conditions of sale. The item "DIY CNC Kit 4 Axis TB6600HG Stepper Motor Driver 2.5Nm Nema23 Display & Handle" is in sale since Friday, April 24, 2020.

This item is in the category "Business & Industrial\Industrial Automation & Motion Controls\Drives & Starters\Drives & Motor Controls\Stepper Controls & Drives". The seller is "savebase" and is located in Los Angeles. This item can be shipped worldwide.

  • Brand: Generic
  • MPN: 10043340111100736

DIY CNC Kit 4 Axis TB6600HG Stepper Motor Driver 2.5Nm Nema23 Display & Handle    DIY CNC Kit 4 Axis TB6600HG Stepper Motor Driver 2.5Nm Nema23 Display & Handle