Axis Diy Cnc

DIY CNC Kit 3 Axis With CNC Breakout Board + Cables + TB6600HG Stepper Drivers

DIY CNC Kit 3 Axis With CNC Breakout Board + Cables + TB6600HG Stepper Drivers

DIY CNC Kit 3 Axis With CNC Breakout Board + Cables + TB6600HG Stepper Drivers    DIY CNC Kit 3 Axis With CNC Breakout Board + Cables + TB6600HG Stepper Drivers
DIY CNC Kit 3 Axis With CNC Breakout Board + Cables + TB6600HG Stepper Drivers. DIY CNC Kit 5 Axis Breakout Board + 3 Pieces TB6600HG Stepper Driver Board Controller.

The latest upgraded salable 5 axis breakout board is specially designed for the CNC single axis stepper driver controller, such as TB6600HG, M542, M542H, MA560, MA860H, 2M542, 2M982 etc single axis stepper driver controller. With this 5 axis breakout board, any 1-5 single axis stepper driver controllers can be directly controlled by the PC via the MACH3, EMC2, KCAM4, etc. The TB1H is a high performance microstepping driver based on the latest original TOSHIBA high-efficiency TB6600HG IC.

The TB6600HG adopts single-chip PWM bipolar sinusoidal chopper to ensure the low vibration and high efficiency. Moreover, the brand new design with BiCD0.13 (45V) process technology on the chipset also ensures maximum 5.0A output current and 45V output withstand voltage. Consequently, as long as the current range of the stepper motor is within 0.2-5 amps, all the 2 Phase or 4 Phase of Nema17, Nema23, Nema24 and Small-sized Nema34 stepper motors will work perfectly with this new-type TB6600HG Stepper Driver. In short, with this CNC Kit, you will get more benefits from the Kit on CNC work.

Please note: This board use parallel port to communicate with computer, the usb is used for providing power for the board. Maximum support 5-axis stepper motor driver controller. Two types of ways to get power, 5V DC power supply or USB port to directly get power from PC. Two-stage signal processing, smooth signal transmission, powerful anti-jamming.

5-input interface to define the Limit, Emergence-Stop, Midpoint-Alignment, Cutter-Alignment, etc. Relay output control interface, accessed by the spindle motor or the air pump, water pump, etc. 5-axis work LED display, visually display the working condition of the stepper driver controller. TB6600HG Stepper Driver Board Controller.

Supply voltage up to 45V DC. Output current up to 5.0A. Suitable for 2-phase and 4-phase motors.

High speed optoelectronic isolation signal input. Single-chip PWM bipolar sinusoidal chopper ensures low vibration and high efficiency. 1, 2, 4 (New Mode), 8, 16 adjustable microstep control, motors run more precisely and smoothly. Equipped with the 3rd generation of breakout board, display panel and control pad to control the motor manually. Cooling Aluminium Box Design for Cooling, and protect the driver board from being damaged by dirt, dust or other liquids.

Overload, overcurrent, overheat, overvoltage and undervoltage protection to avoid damaging your computer and devices. Suitable for any small-and-medium automatic equipment with CNC controller, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines, and pick-place devices. Suitable for a wide range of stepping motors, from NEMA size 17 to 34. For advising, such as brand, architechture mould, badge, nameplate, display boards, doorplate, furniture decoration, etc. For processing various pattern mould.

1224V DC power supply for Nema 17 stepper motors. 2436V DC power supply for Nema 23/24 stepper motors. 3645V DC power supply for Nema 34 stepper motors. Output current of the power supply must exceed the sum of motor rated current.

Please SHUT DOWN the power before you plug or unplug the connectors to avoid burning up the board. (3G 5 Axis Breakout Board). Electrical Specifications of Breakout board. 5V DC via power adapter or directly get power from PC via USB port. Pulse + Direction + Enable Signal Control.

2 Phase, 3 Phase, 4 Phase Microstep Driver M542/M542H/MA860H/3MA2290 etc. Electrical Specifications Of TB6600HG Stepper Driver.

0.2A 5.0A (Peak). Pulse + Direction + Enable Signal Control (Single-Chip PWM Bipolar Sine Chopper).

Nema17, Nema23, Nema24, Small-sized Nema34 (Rated current: 0.2A-5.0A). Operationg Environment & Other Specifications Of TB6600HG Stepper Driver. Natural Cooling or Fan Forced cooling. Avoid dust, oil fog, corrosive gas. 0 °C 50°C (32°F 122°F).

20 °C 65°C (-4°F 149°F). 3 x 1 Axis TB6600HG Microstep Driver Board (TB1H). 1 x 5 Axis Breakout Board.

1 x DB25 LPT Parallel Cable. 1 x USB Power Cable. (May depart from other stock location).

Require that the item should be delivered within a certain time. It is not guaranteed that parcel should arrive within the time stated above. However, 95%+ parcels will be delivered within the reference time.

We will help you to track them. If you receive a not-as-described e. We will arrange a replacement as soon as the case is confirmed. All qualified return/replacement must be guided by us.

We may not accept your return without communication in advance. By placing an order, you acknowledge that you have accepted the terms and conditions of sale. This item is in the category "Business & Industrial\Industrial Automation & Motion Controls\Drives & Starters\Drives & Motor Controls\Stepper Controls & Drives".

The seller is "mega-supply" and is located in this country: US. This item can be shipped to United States, Canada, Mexico, Japan, Brazil, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, Ireland, Netherlands, Poland, Austria, Bahamas, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.

  • Brand: Generic
  • MPN: 10043290114100736
  • Model: 3 axis TB6600HG Controller Kit
  • Application: Support Software Mach3, Linuxcnc, KCam4, etc
  • Modification Description: Suitable for Nema17, 23, 24 Stepper Motors with 0.2-5A
  • Input Voltage: DC 12-45V
  • Number Of Axes: 3

DIY CNC Kit 3 Axis With CNC Breakout Board + Cables + TB6600HG Stepper Drivers    DIY CNC Kit 3 Axis With CNC Breakout Board + Cables + TB6600HG Stepper Drivers