Axis Diy Cnc

DIY CNC X Y Z Axis Linear Stage Slide Kit 8.25 Travel with driver and motor

DIY CNC X Y Z Axis Linear Stage Slide Kit 8.25 Travel with driver and motor
DIY CNC X Y Z Axis Linear Stage Slide Kit 8.25 Travel with driver and motor
DIY CNC X Y Z Axis Linear Stage Slide Kit 8.25 Travel with driver and motor
DIY CNC X Y Z Axis Linear Stage Slide Kit 8.25 Travel with driver and motor
DIY CNC X Y Z Axis Linear Stage Slide Kit 8.25 Travel with driver and motor
DIY CNC X Y Z Axis Linear Stage Slide Kit 8.25 Travel with driver and motor
DIY CNC X Y Z Axis Linear Stage Slide Kit 8.25 Travel with driver and motor
DIY CNC X Y Z Axis Linear Stage Slide Kit 8.25 Travel with driver and motor
DIY CNC X Y Z Axis Linear Stage Slide Kit 8.25 Travel with driver and motor
DIY CNC X Y Z Axis Linear Stage Slide Kit 8.25 Travel with driver and motor
DIY CNC X Y Z Axis Linear Stage Slide Kit 8.25 Travel with driver and motor
DIY CNC X Y Z Axis Linear Stage Slide Kit 8.25 Travel with driver and motor

DIY CNC X Y Z Axis Linear Stage Slide Kit 8.25 Travel with driver and motor    DIY CNC X Y Z Axis Linear Stage Slide Kit 8.25 Travel with driver and motor

Used on a DIY CNC router positioning a 2.5 Hp router. The smaller motor shown in video youtube. V=jIcRBqyoNi0&t=3s was replaced because it was marginal, the replacement is listed below. 2MA860H not pictured but included. N = NEMA (n/a 4stacks).

H = Winding leads h = 4 Lead Parallel. Rotor type = L = laminated.

Shaft Configuration = n = single. Shaft Modifications N = Smooth. S = same as above. 00 = standard motor no seal. Holding torque (2 phases on) oz-in (Nm) 940 (6.64).

Rated Current/Phase (A) 8.6. Phase Resistance (ohms) +- 10% 0.23. Phase Inductance(mH) Typical 2.3.

Detent Torque oz-in (Nm) 64. Rotar Inerita (os-n-S ²) (kgm ² x 10-³). Weight lbs (kgm) 7.6 (3.45). 2MA860H 2phase NEMA23 NEMA34 NEMA42 stepper motor driver controller amplifier AC50-80V 2.5-6A. The link below includes the specs.

The item "DIY CNC X Y Z Axis Linear Stage Slide Kit 8.25 Travel with driver and motor" is in sale since Sunday, May 2, 2021. This item is in the category "Business & Industrial\Industrial Automation & Motion Controls\Rotary & Linear Motion\Linear Actuators". The seller is "jare11234" and is located in Jim Thorpe, Pennsylvania. This item can be shipped to United States.

  • Stroke Length: 200mm (8 in)
  • Brand: Unbranded
  • Voltage: see driver spec listed below


DIY CNC X Y Z Axis Linear Stage Slide Kit 8.25 Travel with driver and motor    DIY CNC X Y Z Axis Linear Stage Slide Kit 8.25 Travel with driver and motor