Axis Diy Cnc

CNC Kit 5 Axis Breakout Board & EMA2-080D72 Drivers For DIY Router/Mill/Plasma

CNC Kit 5 Axis Breakout Board & EMA2-080D72 Drivers For DIY Router/Mill/Plasma

CNC Kit 5 Axis Breakout Board & EMA2-080D72 Drivers For DIY Router/Mill/Plasma   CNC Kit 5 Axis Breakout Board & EMA2-080D72 Drivers For DIY Router/Mill/Plasma
CNC Kit 5 Axis Breakout Board & EMA2-080D72 Drivers For DIY Router/Mill/Plasma. 15 Axis Breakout Board + 5EMA2-080D72 Microstep Motor Drivers. We have been fulfilling CNC Motion Control needs for over 10 years to support any project you may have.

Stepper motors and drivers from ENGMATE. Are with high quality for stable and durable usage. The 5 axis breakout board in this kit is specially designed for CNC single axis stepper driver controller. Maximum 5 pcs can be connected.

In the market, such as ENGMATE series, M542, M542H, MA560, MA860H, 2M542, 2M982, DM542(A), DM860(A) etc.. It can be directly controlled by the PC via the MACH3, EMC2, KCAM4, etc. The stepper driver board controller in kit is a high performance microstepping driver adopting of 32-bit DSP, pure sine wave subdivision technology.

With this technology and the self-adjustment technology (self-adjust current control parameters) for different motors, the drive motors can run with less noise, lower heating, smoother movement and have better performances at higher speed than most of the drivers in the market. This kit is suitable for driving 2-phase and 4-phase Nema 23, Nema 34 hybrid stepping motors with a 2.4A-7.2A current.

Upgraded circuit, work more peacefully and steady than the previous version. To get power: 5V DC power supply or USB port to get power from PC directly. Signal processing, smooth signal transmission, powerful anti-jamming. Interface to define the Limit, Emergence-Stop, Midpoint-Alignment, Cutter-Alignment, etc.

Accessed by the spindle motor or the air pump, water pump, etc. Visually display the working condition of the stepper driver controller. Digital hybrid stepper driver is a high performance Microstep Motor Driver adopting. 32-bit DSP, pure sine wave subdivision technology.

With this technology and the self-adjustment technology (self-adjust current control parameters) for different motors, the drive motors can run with less noise, lower heating, smoother movement and provide big torque at higher speed than most of the drivers in the market. It is suitable for driving 2-phase and 4-phase hybrid stepping motors, the Nema 23, Nema 34 stepper motor with a 2.4A-7.2A current will be suitable. Extra-low motor noise offers excellent quietness.

24-80V DC or 20-60V AC. With 8 stalls output current setting. Adoption of 32-bit DSP, pure sine wave subdivision technology. Low-vibration and low temperature rising.

With 15 stalls microstep subdivision setting. Automatic half-current reduction as long as switching off SW4 when motors stop.

Internal optical isolation, pulse input frequency up to. Short-voltage, over-voltage, over-current and short-circuit protection, protect the motors, driver from being damaged. Suitable for 2-phase and 4-phase Hybrid stepper motors. Electrical Properties of 5Axis Breakout Board(ambient temperature Tj = 25°C). 5V DC via power adapter or directly get power from PC via USB port.

Pulse + Direction + Enable Signal Control. 2 Phase, 3 Phase, 4 Phase Microstep Driver EMA2-050D42/EMA2-070D56/EMA2-080D72/EMA2-220A80 etc. Natural Cooling or Fan Forced cooling. Avoid dust, oil fog, corrosive gas.

(May depart from other stock location). Require that the item should be delivered within a certain time.

It is not guaranteed that parcel should arrive within the time stated above. However, 95%+ parcels will be delivered within the reference time. We will help you to track them. If you receive a not-as-described e. We will arrange a replacement as soon as the case is confirmed.

All qualified return/replacement must be guided by us. We may not accept your return without communication in advance. By placing an order, you acknowledge that you have accepted the terms and conditions of sale.

The item "CNC Kit 5 Axis Breakout Board & EMA2-080D72 Drivers For DIY Router/Mill/Plasma" is in sale since Monday, April 13, 2020. This item is in the category "Business & Industrial\Industrial Automation & Motion Controls\Drives & Starters\Drives & Motor Controls\Stepper Controls & Drives".4u" and is located in Los Angeles.

This item can be shipped worldwide.
  • Brand: Generic
  • MPN: 10103390116100736

CNC Kit 5 Axis Breakout Board & EMA2-080D72 Drivers For DIY Router/Mill/Plasma   CNC Kit 5 Axis Breakout Board & EMA2-080D72 Drivers For DIY Router/Mill/Plasma