Axis Diy Cnc

4 Axis WorkBee CNC Router Machine Kit DIY Wood Milling Machine Screw Belt Driven

4 Axis WorkBee CNC Router Machine Kit DIY Wood Milling Machine Screw Belt Driven
4 Axis WorkBee CNC Router Machine Kit DIY Wood Milling Machine Screw Belt Driven
4 Axis WorkBee CNC Router Machine Kit DIY Wood Milling Machine Screw Belt Driven
4 Axis WorkBee CNC Router Machine Kit DIY Wood Milling Machine Screw Belt Driven
4 Axis WorkBee CNC Router Machine Kit DIY Wood Milling Machine Screw Belt Driven
4 Axis WorkBee CNC Router Machine Kit DIY Wood Milling Machine Screw Belt Driven

4 Axis WorkBee CNC Router Machine Kit DIY Wood Milling Machine Screw Belt Driven    4 Axis WorkBee CNC Router Machine Kit DIY Wood Milling Machine Screw Belt Driven

WorkBee CNC Router Machanical Kit. The WorkBee is a super strong, accurate and easy to assemble CNC machine.

C-Beam, V-Slot, Xtreme Solid V-Wheels and TR88(P2) Lead Screws. Or GT3 Timing Belts it is strong, accurate and reliable. It has been carefully designed and can accurately cut foams, woods, plastics and aluminium to 0.05-0.2mm accuracy or better. Functional engineering parts, toys, signs or anything else that can be imagined, can be made on the WorkBee CNC Machine. The basic kit not including: Electronic parts as wire, Cable kits, Router Spindle, Drive board, Power supply. Working table etc and other Electronic kits. See as what we sell. (Please select the option you need, screw or belt driven, with motors or without motors). All Extrusions are new and M5 tapped as where it is necessary! Note: If you select the option of. ", the part list Not Including ".

Specs of Nema23 Stepper Motor. The main request we got for the OX was for a lead screw driven version.

The WorkBee has been designed from the ground up to incorporate this and more. A screw driven system limits the size of the machine to a maximum of 1000x1000mm. Having this limitation was not practical. The WorkBee CNC Router can either by driven by screws, or by belts. Belts don't have the same limitation as screws. Therefore the WorkBee is available up to 1500x1500mm in size. The WorkBee CNC also has two different spoiler board configurations included in each kit.

One for shallow work up to 27mm deep. And a lowered setup up to 47mm deep. Having this option is beneficial, if the plan is to only cut thin materials, it is a waste of rigidity to have. The Z-Axis reach down more than needed.

The Screw driven version, right image above, shows the lowered configuration. To clarify the Z Travel, this is not the max cutting depth or travel range of the acuator. Z Travel is the distance dowmwards it can travel before hitting. The WorkBee has two spoilerboard support configurations.

One with a travel of 66mm, and a lower one with a travel of 106mm. The reason for the two. The machine is always used to cut thin materials, for accuracy reasons it is better to have the work piece as closed to the. Z-Actuator as possible, so in this case the machine should be setup in the higher 66mm travel configuration.

The higher configuration has a Z travel of 66mm, with a 12mm spoiler board, this will reduce the Z travel to 54mm. 54mm is maximum thickness of material that will fit on the machine. Calculate the max cutting depth for a chosen piece of material it is.

Max Cutting Depth = Z travel - Material Thickness. For instance a setup with a 12mm spoiler board, the max Z travel is 54mm, so when cutting into a material 30mm thick the max cutting depth would be. Max Cutting Depth = 54 - 30 = 24mm. With a 30mm piece of material it would not be possible to cut it the whole way. The max thickness that can be cut the whole way through.

Is half the Z travel. So with a Z travel of 55mm, 27mm is the maximum thickness of material that could be cut the whole way through. Configuration the maximum thickness that can be cut the whole way through is 47mm.

The WorkBee CNC Machine Cutting Bulk Man 3D Logo. In order to make a full kit , you may need the following items>>. 500 x 750mm 300 x 520mm.

750 x 750mm 550 x 520mm. 750 x 1000mm 550 x 770mm.

1000 x 1000mm 800 x 770mm. 1000 x 1500mm 800 x 1270mm. 1500 x 1500mm 1300 x 1270mm. 54mm Or 94mm Travel, 27mm Or 47mm Workable depth, with a 12mm spoilerboard. The spoilerboard supports have two height configuration, these are the maximums for each configuration.

Wheels - Super Hard Polycarbonate Xtreme Solid V Wheels. Drive System - ACME Lead Screws Or GT3 Timing Belts. Accuracy - 0.05 - 0.10mm (Screw Driven) Or 0.10 - 0.20mm Belt Driven. Feedback is very important for us. If you are statisfy with our products and service.

We will solve any problem in 24hous. The item "4 Axis WorkBee CNC Router Machine Kit DIY Wood Milling Machine Screw Belt Driven" is in sale since Thursday, May 16, 2019. This item is in the category "Computers/Tablets & Networking\3D Printers & Supplies\Parts & Accessories". The seller is "bulkman3d" and is located in GuangDong.

This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
  • Brand: Bulk Man 3D
  • MPN: Does Not Apply
  • Item Name: WorkBee CNC Router Mechanical Kit
  • Drive System: ACME Lead Screws Or GT3 Timing Belts
  • Motors: With NEMA23 Stepper Motors or Without Motors
  • Screw Driven Accuracy: 0.05 - 0.10mm
  • Belt Driven Accuracy: 0.10 - 0.20mm
  • Frame Material: 6061-T5 Aluminum

4 Axis WorkBee CNC Router Machine Kit DIY Wood Milling Machine Screw Belt Driven    4 Axis WorkBee CNC Router Machine Kit DIY Wood Milling Machine Screw Belt Driven