Axis Diy Cnc

4 Axis 3040T CNC Router Engraver Engraving Milling Machine Driller DIY+Handwheel

4 Axis 3040T CNC Router Engraver Engraving Milling Machine Driller DIY+Handwheel
4 Axis 3040T CNC Router Engraver Engraving Milling Machine Driller DIY+Handwheel
4 Axis 3040T CNC Router Engraver Engraving Milling Machine Driller DIY+Handwheel
4 Axis 3040T CNC Router Engraver Engraving Milling Machine Driller DIY+Handwheel
4 Axis 3040T CNC Router Engraver Engraving Milling Machine Driller DIY+Handwheel
4 Axis 3040T CNC Router Engraver Engraving Milling Machine Driller DIY+Handwheel
4 Axis 3040T CNC Router Engraver Engraving Milling Machine Driller DIY+Handwheel
4 Axis 3040T CNC Router Engraver Engraving Milling Machine Driller DIY+Handwheel
4 Axis 3040T CNC Router Engraver Engraving Milling Machine Driller DIY+Handwheel
4 Axis 3040T CNC Router Engraver Engraving Milling Machine Driller DIY+Handwheel
4 Axis 3040T CNC Router Engraver Engraving Milling Machine Driller DIY+Handwheel
4 Axis 3040T CNC Router Engraver Engraving Milling Machine Driller DIY+Handwheel

4 Axis 3040T CNC Router Engraver Engraving Milling Machine Driller DIY+Handwheel   4 Axis 3040T CNC Router Engraver Engraving Milling Machine Driller DIY+Handwheel

CNC Router 4 Axis 3040 Engraver Engraving Machine Ball Screw 800W+Handwheel. Disadvantages of simple engraving machines on the market. The drive board is small and can't work for a long time.

The drive can only use 42 small stepper motors with low torque. 3, the structure is simple, the stability in the machining process is not enough.

4, the structure is simple, the stability is not good, can only process some soft material materials, and there is no precision, about the screw drive system, it used the simple screw rod. 5, it's not suitable for advertising stores, woodworking, metal carvings and other shops for long-term use, because the equipment replacement cycle is short, long-term calculations, the cost will be higher. Thus, please note: choosing our heavy-duty engraving machine is a good way to avoid these disadvantages.

For engraving machine = 800W. 1Water cooled spindle motor can work longer time than air cooled motor. 2Water cooled spindle motor has higher stability and better concentricity than air cooled motor.

We only sell machine without software. User should better have electronics background. This 3040T machine is suitable for industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes.

It can work with various materials(metallic & non-metallic), such as: wood, pmma or other plastic, MDF board, native wood, PVC, Acrylic, wood, composite. Like aluminum, copper and silver to engrave them into 3D/2D works etc. It can used for engraving: advertising signs, PCB, nameplates, badges, seals, bronzing plate, aluminum alloy, acrylic plates, ABS resin double color plate.

PVC foaming board, indentation plates, signs, construction models, instrument panels, wooden products, etc. The mini router Frame is movable. The machine can connect with computer as other external device such as printer, scanner.. With the assist of the ROUTER 3040T, your design idea will be real-time display.

X, Y, Z Working Area: 400(Y)295X80(Z)mm. Lathe structure: 6061/6063 Aluminium alloy. X axis---High intensity Chromeplate shaft.

Y axis---High intensity Chromeplate shaft. Z axis---High intensity Chromeplate shaft. The spindle motor must connect with the VFD.

It cannot directly connect with the supply voltage (AC110V). Please don't change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor. Material: 304 stainless steel, Copper coil, Pressure cast aluminum pipe water jacket. VOLTS, current, power: AC 110V/60Hz, 5A, 0.8KW VFD. Principal axis collet: ER11collet, Standard configuration :6mm.

Mode: By adjusting the VFD output voltage and operating frequency from 0-24000RPM. Lubrication way: lubricated by high grease.

Spindle precision: radial beat acuities 0.03mm. Carving Instructions: G code / TAB files / nc file / NCC files.

Communication interface: through parallel connection with computer. Environment: windows XP / win7, 32bits system. Maximum Idle speed:1500mm/min Working Speed :50-1500mm / min (different material with different speed settings). Control unit: Toroidal transformer + PWM power supply module + TB6560 stepping motor drive. The NEW 0.8KW water-cooled VFD is available operating for long time, which can reinforced the processing abilty of the machine and can be used to.

Process aluminum alloy and hard wood. Water cooling spindle works more stable and durable. High quality accurate ball Screws drive make the engrving more precision. Anti-blackflash, high precision, long life circle. Assembling and locating the machine on steady desk well. Make sure that your computer has a 25pin parallel port output. Place the contral box in a ventilated dry place where there is no dust, no moisture. Connecting the control box with the machine and you computer and make sure the plug will not come off. Correctly connect the machine with the controller. Don't suspended the cable which connect the Spindle motor witt axis(X, Y, Z, A).

Damage the driver of the controller. Correctly instal the Spindle motor and the heat pump. The heat pump should be covered completely in the water, then turned on the electric current to.

Check whether the water-cooling system working well. Installing a control Drive on your computer. Fllowing our manual or guideline to set. Before turn on the machine, please check all the cable and water- cooling system to make sure they are working fine. You can enjoy making you dream with using our machine now.

Industrial engraving machine controller was designed for system. Spring can be stretched to 3 meters. Waterproof design, very durable, anti-dirt, oil spray.

Dimensions: 22 x 8 x 3cm. The usb self-check light, you can type the " scroll" on the keyboard to activate it.

Directional motion control: X+, X-, Y+, Y-, Z+, Z-, A+, A. Feed rate control: F+, F.

Spindle speed: speed up, slow down. Programming: E-stop, cycle start, spindle on/off, Redo, single step, original point. Feedback is very important to us. It is impossible to address issues if we do not know about them!

Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday.

ENGRAVING MACHINE parameters: X, Y, Z Working Area: 400(Y)295X80(Z)mm Outside dimension: 630505495mmLWH Table size: 550Y360Xmm Lathe structure: 6061/6063 Aluminium alloy Max. Feeding height: 60mm Drive unit: X axis---SFU01204-4 Ball Screws Y axis---SFU01204-4 Ball Screws Z axis---SFU01204-4 Ball Screws Sliding unit: X axis---High intensity Chromeplate shaft Y axis---High intensity Chromeplate shaft Z axis---High intensity Chromeplate shaft Spindle speed: 24000 rpm Max working frequency: 400Hz Principal axis collet: ER11collet, Standard configuration :6mm Nut Model: ER11-A Cooling: Water-cooling Speed mode: By adjusting the VFD output voltage and operating frequency from 0-24000RPM Lubrication way: lubricated by high grease.

The item "4 Axis 3040T CNC Router Engraver Engraving Milling Machine Driller DIY+Handwheel" is in sale since Thursday, June 18, 2020. This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Woodworking Equipment\Routers". The seller is "dentalove" and is located in Rowland Heights, California.

This item can be shipped to United States.
  • Shipping notice: Can not ship to Puerto Rico,Alaska/Hawaii
  • Brand: Generic
  • MPN: does not apply
  • Country/Region of Manufacture: China
  • Model: 3040 4 axis
  • power: 800W
  • fit for: woodworking/mental working
  • SHIP FROM: USA
  • X,Y,Z Working Area: 400(Y)*295X*80(Z)mm
  • Drive unit: Ball Screws
  • Nut Model: ER11-A
  • Operating Voltage: AC110V
  • UPC: Does not apply
  • Outside dimension: 65*158mm
  • Table size: 550Y*360Xmm
  • Lathe structure: 6061/6063 Aluminium alloy
  • Max. Feeding height: 60mm
  • Stepping motor: 57 two-phase 3A 150N.cm
  • VOLTScurrentpower: AC110 V, 60 HZ,5A,0.8KW VFD
  • Spindle speed: 24000 rpm
  • Max working frequency: 400Hz
  • Principal axis collet: ER11colletStandard configuration :6mm
  • Machine Type: 4 Axis Router Machine

4 Axis 3040T CNC Router Engraver Engraving Milling Machine Driller DIY+Handwheel   4 Axis 3040T CNC Router Engraver Engraving Milling Machine Driller DIY+Handwheel