Axis Diy Cnc

3 Axis DIY CNC Kit & EMA2-220A80 Stepper Drivers For Nema 42, Nema 52

3 Axis DIY CNC Kit & EMA2-220A80 Stepper Drivers For Nema 42, Nema 52

3 Axis DIY CNC Kit & EMA2-220A80 Stepper Drivers For Nema 42, Nema 52    3 Axis DIY CNC Kit & EMA2-220A80 Stepper Drivers For Nema 42, Nema 52

3 Axis DIY CNC Kit & EMA2-220A80 Stepper Drivers For Nema 42, Nema 52. 15 Axis Breakout Board + 3EMA2-220A80 Microstep Motor Drivers. We have been fulfilling CNC Motion Control needs for over 10 years to support any project you may have. Stepper motors and drivers from ENGMATE. Are with high quality for stable and durable usage.

The 5 axis breakout board in this kit is specially designed for CNC single axis stepper driver controller. Maximum 5 pcs can be connected. In the market, such as ENGMATE series, M542, M542H, MA560, MA860H, 2M542, 2M982, DM542(A), DM860(A) etc.. It can be directly controlled by the PC via the MACH3, EMC2, KCAM4, etc.

The stepper driver board controller in kit is a high performance microstepping driver adopting of 32-bit DSP, pure sine wave subdivision technology. With this technology and the self-adjustment technology (self-adjust current control parameters) for different motors, the drive motors can run with less noise, lower heating, smoother movement and have better performances at higher speed than most of the drivers in the market.

This kit is suitable for driving 2-phase and 4-phase Nema 34, Nema 42, Nema 52 hybrid stepping motors with a 2.2A-8.2A current. Upgraded circuit, work more peacefully and steady than the previous version. To get power: 5V DC power supply or USB port to get power from PC directly. Signal processing, smooth signal transmission, powerful anti-jamming. Interface to define the Limit, Emergence-Stop, Midpoint-Alignment, Cutter-Alignment, etc.

Accessed by the spindle motor or the air pump, water pump, etc. Visually display the working condition of the stepper driver controller. Is a high voltage, versatility fully digital stepping driver based on a DSP with advanced control algorithm which can provides optimum torque and bring a unique level of system smoothness at different speed range.

Its unique features make the EMA2-220A80 to be an ideal solution for applications. It is suitable for driving 2-phase and 4-phase hybrid stepping motors, the Nema 34, Nema 42, Nema 52 stepper motor with a 2.2A-8.2A current will be suitable.

Extra-low motor noise offers excellent quietness. Remember motor position, the moto will not shake at the moment of power on. Supply voltage from 80-240V AC. With 7 stalls output current setting. Adoption of 32-bit DSP, pure sine wave subdivision technology.

Low-vibration and low temperature rising. With 15 stalls microstep subdivision setting. Internal optical isolation, pulse input frequency up to. Short-voltage, over-voltage, over-current and short-circuit protection, protect the motors, driver from being damaged. Suitable for 2-phase and 4-phase Hybrid stepper motors. Electrical Properties of 5Axis Breakout Board(ambient temperature Tj = 25°C). 5V DC via power adapter or directly get power from PC via USB port.

Pulse + Direction + Enable Signal Control. 2 Phase, 3 Phase, 4 Phase Microstep Driver EMA2-050D42/EMA2-070D56/EMA2-080D72/EMA2-220A80 etc.

Natural Cooling or Fan Forced cooling. Avoid dust, oil fog, corrosive gas. Nema 34, Nema 42, Nema 52.

Usually, we dispatch your order within. However, 95%+ parcels are delivered within the reference time. Please do contact and confirm with us BEFORE placing order. Australia, New Zealand, South Asia, East Asia. UK, France, Germany and Other EU Countries.

South America, Italy, Other Countries/Regions. We sell items to most countries of the world.

If you receive a not-as-described e. We will arrange a replacement as soon as the case is confirmed. All qualified return/replacement must be guided by us. We may not accept your return without communication in advance.

By placing an order, you acknowledge that you have accepted the terms and conditions of sale. The item "3 Axis DIY CNC Kit & EMA2-220A80 Stepper Drivers For Nema 42, Nema 52" is in sale since Wednesday, October 9, 2019.

This item is in the category "Business & Industrial\Industrial Automation & Motion Controls\Drives & Starters\Drives & Motor Controls\Stepper Controls & Drives". The seller is "savebase" and is located in HK. This item can be shipped worldwide.

  • Brand: Generic
  • MPN: 10103520111100600


3 Axis DIY CNC Kit & EMA2-220A80 Stepper Drivers For Nema 42, Nema 52    3 Axis DIY CNC Kit & EMA2-220A80 Stepper Drivers For Nema 42, Nema 52