Axis Diy Cnc

3 Axis CNC Kit TB6600 HB Nema23 187oz-in Motor 24V PSU For DIY Router/Plasma

3 Axis CNC Kit TB6600 HB Nema23 187oz-in Motor 24V PSU For DIY Router/Plasma

3 Axis CNC Kit TB6600 HB Nema23 187oz-in Motor 24V PSU For DIY Router/Plasma    3 Axis CNC Kit TB6600 HB Nema23 187oz-in Motor 24V PSU For DIY Router/Plasma
3 Axis CNC Kit TB6600 HB Nema23 187oz-in Motor 24V PSU For DIY Router/Plasma. 3 Axis TB6600 Box Professional Driver Board Kit for CNC DIY.

For building a CNC machine, you need a lot of things. Such as Electronics Kit, Spindle Kit, Linear Motion Kit, and Gantry Kit.

This is an Electronics Kit which includes. 3 Axis TB6600 Box Professional Driver Board. Is equipped with TB6600HG chip. Compared with TB6560AHQ chip, the max work voltage of TB6600HG is up to 50V, the output current is up to 5A.

It is specially developed for all the 2 or 4 phase Nema8, Nema11, Nema14, Nema16, Nema17, Nema23, Nema24, Nema34 stepper motors which are with higher current. It can be directly controlled by the PC via the Mach3, Mach4, EMC2, KCAM4, etc. The latest 3rd generation TB6600 Stepper Driver has been upgraded to the intelligent, professional and industrial-level drive set by re-designing the PCB board, embedding intelligent memory chip (professional version) and upgrading the external manual control tools (control pad and display panel). It has the standard version and professional version to meet different user's needs. 3 Axis Box Professional Version.

Intelligent motor control via PC. Manual motor control via control panel. Intelligent switch between PC and control panel. Synchronous coordinates display on PC and display panel. Real-time tracking of motor moving path.

Aluminum & high intensity PVC housing protection. Two Unique Functions of Professional Version. With the embedded intelligent memory chip, this stepper driver can easily record MAXIMUM 4 Axis' (X, Y, Z, A Axis) G-code running in the CNC software e. On the computer, after which you can run motors using the recorded G-code without the computer. The upgraded built-in manual control tools (display panel and control panel) can not only be used for manual motor control, but also manual G-code programming.

Manually programmed G-code will be recorded onto the embedded intelligent memory chip, after which you can easily run motors with recorded G-code. This function is widely applied in RBI machine, Conveyor, etc.

Before powering on the board, please set the DIP Switches first. Matching Stepper Motors and Power Supply. Nema8, Nema11, Nema14, Nema16, Nema17. Manual motor control via the control panel; support tool-settings on X, Y, Z, Axis without the computer. Between the computer and the control panel.

On the computer and the display panel, up to 3 axis (X, Y, Z, axis). Real-time tracking of the motor moving path.

1, 2, 4 (new mode), 8, 16. Adjustable microstep control for more accurate and smoother motor running. Automatic idle-current reduction, powerful anti-jamming capability. 5 types of input control on the manual control interface, to set. 4 types of output current adjustable.

0-10V PWM signal output port. For speed adjustment and one relay control port. Mach4, Linux CNC (EMC2), KCAM4 CNC Software, etc. Suitable for 2 or 4 phase stepper motors with. Aluminum & high intensity PVC Box Design.

For better cooling effect and item protection. For motor control without the computer. High torque, more smooth movement.

High efficiency, energy-saving, low noise, and low vibration. High start torque, low start current, and reliable performance. Simple 4 wires ensure easier wiring, installation, and maintenance. High efficiency, high reliability, low cost. Adjustable ±10% Output Voltage support.

PWM control and regulation, ensure the steady and precise output voltage. Over-temperature protection: built-in a powerful fan for cooling. 100% full load burn-in test. Over current, over voltage, short circuit. Low output ripple and yawp.

The products in the wiring diagram are for reference. Suitable for a variety of small-sized automation equipment and instruments. For any small-and-medium automatic equipment with CNC controller, such as engraving machine, plasma cutting machine, milling machine, foam cutting machine, lathes, laser cutting machine etc. For other industrial application, such as 3D printer, medical instruments, stage light equipment, robot, music fountain etc. Electrical Properties of TB6600 Driver Board (ambient temperature Tj = 25°C). Pulse + Direction + Enable Signal Control (Bipolar constant-current PWM output). SRA-12VDC-CL 20A 14VDC 20A 125VAC.

Nema8, Nema11, Nema14, Nema16, Nema17, Nema23, Nema24, Nema34. 24V 10A Switching Power Supply. 110VAC/ 220VAC±20% (selected by switch). 30.633.2V hiccup mode, auto-recovery.

I/P-O/P:1.5KVAC, I/P-FG:1.5KVAC, O/P-FG:0.5KVAC. Australia, New Zealand, South Asia, East Asia. UK, France, Germany and Other EU Countries.

South America, Italy, Other Countries/ Regions. We sell items to most countries of the world. Usually, we dispatch your order within. However, 95%+ parcels are delivered within the reference time. Please do contact and confirm with us BEFORE placing order. If you receive a not-as-described e. We will arrange a replacement as soon as the case is confirmed. All qualified return/replacement must be guided by us. We may not accept your return without communication in advance.

By placing an order, you acknowledge that you have accepted the terms and conditions of sale. The item "3 Axis CNC Kit TB6600 HB Nema23 187oz-in Motor 24V PSU For DIY Router/Plasma" is in sale since Tuesday, April 27, 2021. This item is in the category "Business & Industrial\Industrial Automation & Motion Controls\Drives & Starters\Drives & Motor Controls\Stepper Controls & Drives".

The seller is "easysupply" and is located in HK. This item can be shipped worldwide.

  • Brand: Generic
  • MPN: 10133550115100600
  • Model: 3 axis Professional TB6600 Box Nema23 Kit
  • Application: Support Software Mach3, Lincxcnc, KCam4, etc
  • Modification Description: Holding Torque 1.32N.

    m (187oz-in)

  • Input Voltage: DC 24V 10A
  • Number Of Axes: 3


3 Axis CNC Kit TB6600 HB Nema23 187oz-in Motor 24V PSU For DIY Router/Plasma    3 Axis CNC Kit TB6600 HB Nema23 187oz-in Motor 24V PSU For DIY Router/Plasma