Cable Drag Chain - 15x30mm. 8mm M5 Low Profile Screws. 15mm M5 Low Profile Screws. 10mm M4 Button Head Screws. The maximum recommended speed for Lead Screws 1000mm or greater is 400RPM.Any Mains power connections must be installed by a Licensed electrician or suitability qualified person! To clarify the Z Travel, this is not the max cutting depth or travel range of the actuator. Z Travel is the distance downwards it can. The WorkBee has two spoiler board support configurations. One with a travel of 66mm, and a lower one with a travel of 106mm. The reason for the two. Configurations is that if the machine is always used to cut thin materials, for accuracy reasons it is better. To have the workpiece as close to the. Z-Actuator as possible, so in this case, the machine should be set up in the higher 66mm.
The higher configuration has a Z travel of 66mm, with a 12mm spoiler board, this will reduce the Z travel to 54mm. 54mm is the maximum thickness of the material that will fit on the machine. To calculate the max cutting depth for a chosen piece of material it is. Max Cutting Depth = Z travel - Material Thickness.
For instance setup with a 12mm spoiler board, the max Z travel is 54mm, so when cutting into a material 30mm thick the max. Max Cutting Depth = 54 - 30 = 24mm. This means with a 30mm piece of material it would not be possible to cut it the whole way through. The max thickness that can.Be cut the whole way through. Is half the Z travel. So with a Z travel of 55mm, 27mm is the maximum thickness of material that. Could be cut the whole way through. Configuration, the maximum thickness that can be cut the whole way.
750 x 750mm 550 x 520mm. 750 x 1000mm 550 x 770mm. 1000 x 1000mm 800 x 770mm. 1000 x 1500mm 800 x 1270mm. 54mm Or 94mm Travel, 27mm Or 47mm Workable depth, with a 12mm spoiler board.The spoiler board supports have two height. The maximums for each configuration. Polycarbonate wheels on anodized CBeam VSlot Extrusion.
NEMA23 175oz or 345ozin Stepper Motors (X, Y & Z). 0.05 - 0.10mm." V-Slot " and " C-BEAM " are registered trademarks of OpenBuilds LLC as released under the Creative Commons Licence "Attribution-ShareAlike" All our components are designed to work and are fully compatible with the products produced by OpenBuilds. Return must include all original package and accesorries, item must in good condition. Please do NOT leave negative or neutral feedback without asking for help. We will try our best to solve your problem to your satisfaction.
We are always here with you! The item "1000x1500mm 4 Axis WorkBee CNC Router Machine DIY Carving + Drag Cable Chain" is in sale since Monday, May 25, 2020. This item is in the category "Computers/Tablets & Networking\3D Printers & Supplies\3D Printer Parts". The seller is "bulkman3d" and is located in GuangDong. This item can be shipped worldwide.